Foro x-plane.es

Holaaa.... a ver si me sabeis sacar de este atolladero porque no soy capaz y no lo entiendo.

Tengo asignado el encendido y arranque de la APU del A333 que vuelo a una tecla de un teclado numérico de la siguiente manera.

Numpad-7 <NONE> sim/electrical/APU_start

y el apagado a

Numpad-4 <NONE> sim/electrical/APU_off

El problema viene cuando asigno ese comando en el archivo.ini del avión que maneja los paneles saitek y que corre con flyLua, que enciende la APU (en la pantalla se ve encender la luz verde en el botón de la misma), pero no la arranca, siendo ambos el mismo comando.

;  *********** COWL Flaps Switch *****************
;Cowl Flaps enable = 0 disable | = 1 default | = 2 remapable command | = 3 remapable datareference | = 4 remapable float datareference
;remapable float datareference a 100 will end up 1.000000, 50 will end up 0.500000
Cowl Flaps enable = 2

;command for cowl flaps open switch open command
cowl_flaps_open_cmd = sim/electrical/APU_start

;command for cowl flaps close switch close command
cowl_flaps_close_cmd = sim/electrical/APU_off

;command for 2nd cowl flaps open switch open command
cowl2_flaps_open_cmd = sim/electrical/APU_start

;command for 2nd cowl flaps close switch close command
cowl2_flaps_close_cmd =  sim/electrical/APU_off

;command for 3rd cowl flaps open switch open command
cowl3_flaps_open_cmd = sim/electrical/APU_start

;command for 3rd cowl flaps close switch close command
cowl3_flaps_close_cmd =  sim/electrical/APU_off

;command for 4th cowl flaps open switch open command
cowl4_flaps_open_cmd = sim/electrical/APU_start

;command for 4th cowl flaps close switch close command
cowl4_flaps_close_cmd =  sim/electrical/APU_off

;command for 5th cowl flaps open switch open command
cowl5_flaps_open_cmd = sim/electrical/APU_start

;command for 5th cowl flaps close switch close command
cowl5_flaps_close_cmd =  sim/electrical/APU_off

;command for 6th cowl flaps open switch open command
cowl6_flaps_open_cmd = sim/electrical/APU_start

;command for 6th cowl flaps close switch close command
cowl6_flaps_close_cmd =  sim/electrical/APU_off

;command for 7th cowl flaps open switch open command
cowl7_flaps_open_cmd = sim/electrical/APU_start

;command for 7th cowl flaps close switch close command
cowl7_flaps_close_cmd = sim/electrical/APU_off

;command for 8th cowl flaps open switch open command
cowl8_flaps_open_cmd = sim/electrical/APU_start

;command for 8th cowl flaps close switch close command
cowl8_flaps_close_cmd = sim/electrical/APU_off




He visto que hay muchas configuraciones para aviones concretos que arrancan la APU, pero usan creo comandos específicos del avión, y no el genérico como hago yo.

Gracias por adelantado.